The overall cleaning process of the vacuum plasma cleaner:
 

　　1) Send the workpiece to be cleaned into the vacuum chamber and fix it, turn on the equipment, and gradually exhaust, so that the vacuum value of the vacuum system can reach the standard vacuum value of 10Pa or less. Generally, the exhaust pipe time takes a few minutes.
 

　　2) Introduce the plasma cleaning gas into the vacuum system to maintain a stable pressure in the cavity. O2, argon, radon, N2, carbon tetrafluoride and other vapors can be used to clean raw materials.
 

　　3) Increase the high-frequency working voltage between the vacuum system electrode and the grounding system, so that the air is penetrated. According to the plasma technology and plasma technology caused by arc discharge, the plasma technology caused by the vacuum system can completely cover the processed product workpiece and gradually clean up the work. Generally, the cleaning solution is continuously tens of seconds to tens of minutes.
 

　　4) After cleaning, disconnect the switch power supply, and discharge the vapor and vaporized dirt according to the water ring vacuum.
 

　　The above is the content of the overall cleaning process of the vacuum plasma cleaner. Will it help you after reading it? If you want to inquire about plasma cleaners, please contact Zhenyi as soon as possible!