Dow corning 1-4105 is a two-component transparent without solvent rubber thermal curing rapidly low viscosity and low temperature fast curing heat curing one-component transparent coating solvent-free elastomer rapid heating solidify
Dow corning 1-4105 is a two-component, transparent without solvent rubber, thermal curing rapidly, low viscosity and low temperature fast curing, heat curing one-component, transparent coating, solvent-free elastomer, rapid heating solidifying, transparent, resist the influence of humidity and other bad environment;
Good dielectric performance.
Product features
It has good anti-moisture, weathering and dielectric properties.
The performance parameters
Application scenarios
A protective coating can be provided for hard and flexible circuit boards.
Single unit, automatic cleaning function.
The transparent rubber coating is elastic and suitable for the coating operation of printed circuit board.
Method of use
Usage: this article can be applied to apply brush, spray, coating, etc., and the coating is not to flow.
Before applying the glue: before applying the coating, you must remove the water and grease from the surface of the object.
Glue: a coating thickness is usually between 0.1 and 0.2 mm.
The pecking order: after the first coating, it can be applied to the second time.
Finally the film thickness should be 0.3 ~ 0.5 mm.
After the operation is completed, the adhesive should be tightened and sealed immediately.
Professional adhesive technology solution please click for consultation
